Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
type 1 and type 2 helmets

We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
We abide by the privacy policy and human rights, follow the business order, do our utmost to provide you with a fair and secure trading environment, and look forward to your customers coming to cooperate with us, openly mind and trade with customers, promote common development, and work together for a win-win situation.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems









14/9/2007, · Posted By Phillip Other than suppliers / manufactures is there any HSE / authoritative guidance that prescribes on how often ,safety helmets, should be replaced? I am saying none as the ,frequency, of replacement depends upon the ,helmet's, state & usage. My colleagues say either 3 or 5 years but cannot provide a reference.

Site ,Safety Inspections,. Regular site ,safety inspections, using site-specific checklists keep the workplace safe by identifying and correcting hazards in the workplace. ,Inspection frequency, depends on the hazard level of the workplace; sites may need checks at every shift, daily, quarterly or annually.

7/11/2020, · The mass of ,helmet, without attachments should be 400 g. If it is to exceed 400 g, with nearing 35 g, it should be labelled. PERFORMANCE ,INSPECTION,. Method to test for sterilization. Expose the ,helmet, to moist air (using formaldehyde) for 10 minutes at temperature of 25 0 c. Immerse in 1:10 Formalin solution for 10 minutes at temperature of 25 0 c.

Here are some useful tips for the ,inspection,, care, and use of your ,safety helmet,: Inspect Your ,Safety Helmet, Daily – All ,safety helmet, components and accessories should be inspected daily for excess wear or damage, such as dents, cracks, penetration, and heat or chemical exposure that might reduce the degree of protection originally provided.

Interim ,inspections, may be needed between detailed ,inspections, because the employer’s risk assessment has identified a risk that could result in significant deterioration, affecting the ,safety, of the lanyard before the next detailed ,inspection, is due. The need for and ,frequency, of interim ,inspections, will depend on use.

The ,helmet, is your most important piece of ,safety, equipment. ... How to Give your Motorcycle ,Helmet, a ,Safety Inspection,. MC Garage help for ,helmet safety,. By Ari Henning. June 22, 2016.

Management of Health and ,Safety, Regulations 1992 you will need to conduct a further assessment to see if there is a need for ,inspection, under Regulation 6 of Puwer 1998. An easy reference table for type of business, type of equipment and the ,frequency, of ,inspection, required is given overleaf.

Two arrows curving to form a circle when the ,helmet, can be worn forwards or backwards; LT – When the ,helmet, is designed to provide protection at low temperatures 22 °F (-30 °C). HV – When the ,helmet, meets all requirements for high visibility. Instructions for care and use must accompany, but do not need to be included on, the hard hat.

Frequency, of ,inspection, tagged to vehicle type: S$20.33: S$20.33: Diesel Smoke Test (Heavy Goods Vehicles and Buses) ,Frequency, of ,inspection, tagged to vehicle type: S$29.96: S$29.96: High Idle Emission Test (Petrol Vehicles registered on or after 1 April 2014)* ,Frequency, of ,inspection, tagged to vehicle type: S$6.42: S$6.42

14/9/2007, · Posted By Phillip Other than suppliers / manufactures is there any HSE / authoritative guidance that prescribes on how often ,safety helmets, should be replaced? I am saying none as the ,frequency, of replacement depends upon the ,helmet's, state & usage. My colleagues say either 3 or 5 years but cannot provide a reference.

The V-Gard GREEN ,Helmet, and the traditional V-Gard ,Helmet, offer the same trusted look and quality customers have come to expect from MSA. V-Gard and V-Gard GREEN ,helmets, are third-party SEI certified as Type I, Class E under ANSI/ISEA Z89.1-2014 and CSA Z94.1-2015.

Step two: Internal ,inspections,. This is a regular internal ,inspection, normally carried out by the nominated PRRS. The ,frequency, of internal ,inspections, will depend on a number of factors that are particular to the end user, such as size, low or high levels of operations / …

An ,inspection, should concentrate on those ,safety,-related parts which are necessary for the safe operation of work equipment and, in some cases, this may require testing or dismantling. However, not all ,safety,-critical features on a particular item of work equipment may require ,inspection, …

Safety Helmet Inspections,. Hard hats, or ,safety helmets,, are one of the most recognizable pieces of ,safety, equipment. Unfortunately, since they’re so common, they may not be inspected nearly enough. But a ,safety helmet, must be in proper condition to do its intended job!

Management of Health and ,Safety, Regulations 1992 you will need to conduct a further assessment to see if there is a need for ,inspection, under Regulation 6 of Puwer 1998. An easy reference table for type of business, type of equipment and the ,frequency, of ,inspection, required is given overleaf.