What is the HS code of the helmet kit

Safety helmets must be worn when performing most construction works, works in the vicinity of lifting equipment (cranes, hoists, etc.) and suspended loads, works in forestry, works in cisterns, wells, shafts, tunnels, etc. In these situations the use of a safety helmet will help protect against injuries to the scalp, skull and cervical vertebrae.

The standard also covers conditions where electrical hazards are present. 1910.135 (a) (2) states, "Protective helmets designed to reduce electrical shock hazard shall be worn by each such affected employee when near exposed electrical conductors which could contact the head."

Class E (Formerly Class B): Helmets for sue where electrical hazards are present (in utility services) that are non-conducting and intended to protect against falling objects and reduce the danger of exposure to high voltage electrical shocks and burns. Offers the highest protection with high-voltage shock and burn protection up to 20,000 volts.

Safety helmet are designed to protect the head against falling objects and the side of the head, eyes, and neck from any untoward impacts, bumps, scrapes, and electrical exposure, etc. Wearing a safety helmet is a mandatory requirement that should be followed by all employers who should provide their workers with hard hats/safety helmet and fully ensure that they wear them.

Use our ,Helmet, and Visor Microfiber Cloth to gently wipe away any excess liquid whilst simultaneously polishing for a nice, shiny finish. Our Visor, ,Lens, and Goggle Cleaner is fully biodegradable and completely safe to use on all ,lens, materials, including polycarbonate. Step 4: Use our Anti-Fog treatment to ensure your goggles or visor stay fog ...

Mandatory Signs specify actions that are required to safeguard health and/or avoid injury. Mandatory signs provide specific instructions that ,MUST, be carried out. These industrial and workplace ,safety, signs are essential for promoting the wearing of PPE a

24/7/2018, · Specific works require specific protective equipment. Safety harness should be worn when working at any height greater than 1.5 m above ground level and a full harness equipped with a connector is preferred. Fall arrest equipment may be necessary when working at high level.

Workers ,must wear, a protective ,helmet, (hard hat) when working in areas where there is a potential for injury to the head from falling objects. [ 29 CFR 1915.155(a)(1) ] Workers ,must wear, a protective ,helmet, designed to reduce ,electrical, shock hazards where there is potential for ,electric, shock or burns.

The standard also covers conditions where electrical hazards are present. 1910.135(a)(2) states, "Protective helmets designed to reduce electrical shock hazard shall be worn by each such affected employee when near exposed electrical conductors which could contact the head."

Substation ,safety, awareness has been gaining prominence, have a read through this in-depth look into several aspects of substation ,safety,, primarily focusing on personal protective equipment (PPE) essentials, risks, danger-tackling tips and training requirements.